Skip to main content
Track MACD
51 / 80
Library

2008issue C081-4

Assign one job per indicator in a three-screens rule set

This construction gives the daily exponential-moving-average the trend call, uses a macd-histogram and an acceleration-deceleration histogram only to grade that trend, and reserves lower-timeframe relative-strength-index for pullback timing. A disagreement among screens changes entry permission, not the job assigned to each tool.

  • Give the daily exponential-moving-average the sole job of naming uptrend or downtrend from price relative to a sloping 21-period close average.
  • Treat buying-area and selling-area as four simultaneous daily conditions, including a rising or falling macd-histogram and a supportive acceleration-deceleration reading.
  • Use conservative-downgrade to limit new entries to the four-hour chart when one histogram turns against the daily trend, and place no new trade when both turn against it.
  • After the daily filter is set, time the pullback with relative-strength-index near 30 or 70, then manage with a closed-candle first checkpoint and a trail through the moving average.
Entries in this reading3 entries

Split the jobs across screens

A three-screens construction combines a higher-interval trend filter with a lower-interval oscillator entry so conflicting chart scales are not treated as equal votes. In this workflow the daily screen defines the trend and grades its quality. The lower-timeframe relative-strength-index times a pullback only after that filter is set.

Name the trend on the daily screen

The daily exponential-moving-average is a 21-period average of the close. Price above a positively sloping average is treated as an uptrend. Price below a negatively sloping average is treated as a downtrend.

On the same daily screen, a macd-histogram with settings 12/26/1 marks stable trend development by whether the current bar is higher or lower than the previous bar. It is a stable-development check, not a standalone trade trigger.

An acceleration-deceleration histogram is added to flag whether the existing driving force is speeding up or slowing down. It confirms or vetoes the daily trend grade. It does not replace the exponential-moving-average trend call.

Specify a buying-area or selling-area

A long setup, the buying-area, is four simultaneous daily conditions: price above the exponential-moving-average, a positively sloping exponential-moving-average, a rising macd-histogram, and a supportive green acceleration-deceleration histogram.

A short-side close or sell setup, the selling-area, is the inverse four conditions: price below the exponential-moving-average, a negatively sloping exponential-moving-average, a falling macd-histogram, and a red acceleration-deceleration histogram.

Apply conservative-downgrade when histograms split

If the daily exponential-moving-average still shows an uptrend but one of the two histograms turns down, conservative-downgrade limits new entries to the four-hour chart. If both histograms move against the trend, no new trade is placed.

Wait for relative-strength-index on the lower timeframe

After the daily trend filter is set, the lower-timeframe entry waits for relative-strength-index to reach an oversold area near 30 in an uptrend or an overbought area near 70 in a downtrend.

Define the first checkpoint and the trail

A first profit checkpoint is a closed candle with relative-strength-index above 70 after a long, or below 30 after a short. After that close, the position may be reduced or the stop moved to breakeven.

Remaining management is constructed as a trail: book at support or resistance, trail with the moving average, and exit when a candle closes through that average.

Reject exhausted first-look signals

The stacked filters are designed to discard many first-look signals. A candidate hourly relative-strength-index setup is still rejected if the daily trend or the macd-histogram and acceleration-deceleration histograms show the move has already exhausted.

Educational research material, not investment advice. Historical source context does not establish present-day performance.
51 of 80 in the MACD track
20081-3 pp.Next on MACDSequencing RSI, MACD, and average crossoversGive the average cross, RSI, and MACD one exclusive question each: birth of the regime, exhaustion through price-RSI divergence, and the advent of a turn.
All readings on this track · 80 readings
  1. 1988Rebuild MACD-Mo and MACD-H before treating them as signals
  2. 1989Four-span MACD lookbacks as perishable parameters
  3. 1989Weekly then daily MACD confirmation on individual stocks
  4. 1991Regime-gated MACD and stochastic rules inside a checklist
  5. 1991Constructing MACD signal lines and divergence tests
  6. 1991MACD parameter order and cycle phase lag
  7. 1992Lengthened bond MACD as an equity regime filter
  8. 1992Long-horizon MACD construction from paired exponential averages
  9. 1993Constructing a signed ten-point trend filter
  10. 1994Constructing lag-reduced double exponential averages for MACD
  11. 1994Seeding DEMA2 filters to build a MACD signal
  12. 1994Constructing MACD from lag-reduced exponential averages
  13. 1994TEMA1 from nested exponential averages, then a two-horizon MACD
  14. 1994Constructing entry and exit on a relative-strength MACD
  15. 1994Constructing a relative-strength MACD crossover spreadsheet
  16. 1995Consensus presignal filters for Relative Strength Index, MACD and the Stochastic oscillator
  17. 1997Confirm the MACD turn with price, then exit on the histogram
  18. 1997Reconstructing a stochastic oscillator, MACD, and a triple-smoothed oscillator
  19. 1997Moving-average windows before crossovers and MACD
  20. 1999Second-stage MACD on relative-strength inputs
  21. 1999Constructing MACD from exponential-average spreads for crossover and divergence
  22. 1999Coding candlesticks into numeric indicators
  23. 2001Second-low confirmation with a percentage oscillator and money-flow filter
  24. 2001Constructing MACD from exponential average spreads and a signal line
  25. 2002Separate bounded and trend-following oscillator rules
  26. 2002Sort the regime before assigning MACD and stochastic jobs
  27. 2002Building classic divergence filters from RSI and MACD
  28. 2002Weekly highs and lows as trend gates
  29. 2002Constructing channel-normalized Fisher reversal signals
  30. 2002Affine-price and the Fisher transform as a constructed companion to MACD
  31. 2003Regularized EMA construction with a MACD line and a thrust oscillator
  32. 2003Curvature-penalized exponential averages versus MACD
  33. 2003MACD, moving averages, and a trend filter as one timing system
  34. 2003Fractional MACD and linear-regression reversal construction
  35. 2004Weekly MACD-histogram timing of bear-market rallies
  36. 2004Candlestick triggers filtered by MACD divergence
  37. 2004Staging energy-complex tops with trendline, breakout, and MACD
  38. 2005Selling climax holds versus fails
  39. 2006Treat a sideways Wave as permission before a breakout
  40. 2007MACD with a Stochastic oscillator for spotting trend reversals
  41. 2007Rebuilding an S&P 500 fifth-wave count after a broken target
  42. 2007Constructing MACD, RSI, and stochastic confirmation for futures
  43. 2007MACD histogram divergence needs a confirming close
  44. 2007Write the plan as a stack: ratio, boundary, then oscillators
  45. 2008MACD divergence and Stochastic oscillator confirmation on lumber futures
  46. 2008Assign confirmation, timing, and a stop before a currency pair is tested
  47. 2008Confirm the ten-bagger launch path before the MACD exit
  48. 2008Reading the offloaded evidence file
  49. 2008A Leader companion for MACD direction warnings
  50. 2008Relative strength exits with MACD averages and RSI
  51. 2008Assign one job per indicator in a three-screens rule set
  52. 2008Sequencing RSI, MACD, and average crossovers
  53. 2010Constructing the Schaff Trend Cycle from MACD and a dominant-cycle window
  54. 2010Schaff Trend Cycle as a MACD and Stochastic oscillator combination
  55. 2010Combining Relative Strength Index, the stochastic oscillator, and MACD as slope filters
  56. 2010Short-term wave and ratio clues without direction calls
  57. 2010A precise pullback entry and an unplanned profit-protection exit
  58. 2010Filtering MACD false signals with trendline breaks
  59. 2011Vendor feeds as an input variable in a MACD evaluation
  60. 2012Out-of-the-money versus in-the-money option sensitivity to implied volatility
  61. 2012MACD window tuning as hold-time control
  62. 2012Combining a moving-average crossover with MACD and support-resistance
  63. 2012Testing a published MACD entry with a histogram and signal-line agreement filter
  64. 2012Treat sample systems as a lab before live rules
  65. 2013Constructing moving averages and MACD from one price series
  66. 2013The next-bar price that forces a MACD signal-line cross
  67. 2013Constructing next-bar MACD reversal prices
  68. 2013Constructing inverted MACD reversal prices
  69. 2014Shared-filter combinations of the stochastic oscillator, MACD, and RSI
  70. 2014Square-root lookbacks for combined MACD and RSI
  71. 2015Audit open interest and trend before trusting oscillator crossovers
  72. 2016MACD without a signal line, confirmed by moving-average trend filters
  73. 2016Use RSI, MACD, and a moving average as a market-health consensus
  74. 2016MACD line versus histogram is a display problem first
  75. 2017Weekly and daily MACD on a single daily chart
  76. 2017Weekly and daily MACD as a stacked momentum filter
  77. 2017Nested weekly and daily MACD from paired EMA spreads
  78. 2018Weekly and daily PPO scale versus MACD, with bounded RSI and stochastic readings
  79. 2018Constructing a weekly and daily percentage price oscillator
  80. 2020Constructing Wyckoff tape reading with MACD, moving-average, and RSI filters
All 115 readings tagged MACD
Also on MACD5 readings